Standard Features are: 14.5 KVA/11.6 KW (1 phase) isolated copper wound power transformer: Primary Voltage: 460/575, 60 Hz Secondary Voltage 0/65/85 with thermal trip to prevent overload. **220 Volt available upon request Two semi-automatic digital temperature controllers (0-1200°C or 0-2200°F, Type "K") with ramp rate in degrees/hr to set point and capable of performing up to two different processes at a time (1/8 DIN) or two fully automatic individual digital controllers (0-1200°C or 0-2200°F, Type "K") (not shown on picture) (Part#: P159°F/°C) controls temperature rate of rise, length of hold time and rate of cool. User friendly and simple operation Digital amp meter (0-200 amps) with two-channel switch and two current transformers. Stainless steel cabinet with feet and two lifting bars. Two cooling fans. One 110 volt auxiliary plug. 30 amp - 1 phase circuit breaker with 120 volt uv release. Two 200 amp ALBRIGHT contactors (100% duty cycle). Two 110 volt neons and 2 x two way on off switches. Instrument wiring tinned copper to prevent corrosion and down time. Note 1: One two-zone console is capable of heating an area up to 2.5 sq. ft. approximately using a total of 4 x 60 volt ceramic pad heaters. Note 2: One two-zone console is capable of heating an area up to 3.33 sq. ft. approximately using a total of 4 x 80 volt ceramic pad heaters.